Datavideo ZEK-1 Zoom Encoder Kit Mounting bar and holder including Zoom Encoder (for motorized lenses) Datavideo ZEK-1, it can detect and read out the Zoom changes. And convert this information into a Zoom position to send back for the controller to memory and recall the saved zoom position. M0.8 gear is mounted on the Zoom encoder while shipped Standard it’s equipped with M0.8 gearing, which is the standard in most lenses. In some cases, M0.6 is used so an extra gear is included. In other cases, when your camera doesn’t have a threaded zoom lens, you can use a belt with M0.8 or M0.6 gearing. Camera Mount Plate The larger mounting plate from ZEK-1 gives more space for you to mount the camera M0.6 Gear Using Cameras with M0.6 gears on the zoom ring (ex: Sony X200), the additional M0.6 gear can directly match with the Lens. Metal Bar & Bar Holder & Zoom Encoder (M0.8 gear) The metal bar holds the zoom encoder in place for achieving the best accuracy. The gear provides the engagement with the camera’s zoom ring and the 4-pin mini-DIN connector and to be connected to the Zoom Sensor port on the PTR- 10/10T Mark II. Gear Ring Belt designed for M0.8 gear Wrap the gear ring belt around the zoom ring if your camcorder’s zoom ring is neither M0.6 nor M0.8 on the PTR-10/10T MARK II. Compatible with most cameras that have a moving zoom ring except – A single zoom/focus ring – When the zoom ring is blocked by the servo motor Related Products: DataVideo WM-11 Professional Wall Mount for Robotic Pan Tilt Head Datavideo CM-10 Celling Mount Datavideo BB-1 KIT dvCloud Remote Device Control Kit Datavideo ZEK-2 Zoom Control Kit for Tilta Nucleus-M Motor
